How can I check my physical appliance is operating correctly?

There are 2 key stages to check that your appliance is online and protecting your network and its endpoints.  

• Hardware installation
• Network coverage

Hardware installation verification

This test will ensure that your physical Field Effect appliance is installed correctly within your network.

Step 1

Log into the Filed Effect physical appliance.

Step 2

All the Connectivity Status checks should be   Ok   

Network coverage validation

This test will validate that your physical Field Effect appliance has proper connectivity and Field Effect is providing network coverage:

Step 1

This test must be performed from an endpoint device connected to the network being tested.

Step 2

Navigate to https://verify.fieldeffect.net

Step 3

Select Network Coverage

Step 4

The Network Coverage test will begin and when complete you should see the following screen. 

Step 5

You should then receive a "Service Validation Test - Network Event" ARO which you can dismiss.